F1430 Fishing Kayak Full-Size Templates, Plans and Manual

  • $99.99$199.99

    For our international customers, where shipping a kit is prohibitive, we offer the plans and full-size templates for our F1430 fishing kayak.






Save on shipping and materials with our F1430 Sit-on -Top kayak plan set.  With this purchase, you’ll get a printed set of plans shipped to you.

The 2017 updated F1430 set of plan uses reference points on the hull to speed up the assembly process, and also updated bulkheads that will save some fitting time and save some weight

Included are printed copies of:

24″x18″ (Arch C) Lines Drawing

24″x18″ (Arch C) Outboard Profile  & Deck Plan

24″x18″ (Arch C) Construction

24″x18″ (Arch C) Construction Details

24″x18″ (Arch C) Sheathing schedule

24″x18″ (Arch C) Panels Layout

24″x18″ (Arch C) Temp Frames & Reference Points

24″x 15ft Full-size Templates A (film)

24″x 10ft Full-size Templates B (paper)

8-1/2″x11″ Assembly manual

Check out the complete specs of this boat here

To complete this boat you will need:

  • 4 sheets of 4mm marine grade plywood
  • 1 sheet of construction plywood, thickness between 1/4″ and 1/2″
  • 96″x3/4″x3/4″[2500x18x18mm] (4x) Western red Cedar or similar for sheer clamps
  • 12″x3/4″x1/2″[300x18x12mm] (±20x) Western Red Cedar or similar for cleats
  • 4″x1-1/2″x1-1/2″[100x38x38mm] (4x) Western Red Cedar or similar for scuppers
  • 1 gallon [1000ml] of epoxy laminating resin
  • 1/2 gallon [500ml] 2:1 epoxy-activator
  • 1/2 gallon [500ml] of wood flour
  • 10 yards of 4oz/sq.yd. Fiberglass cloth
  • 40yd 6oz cloth tape x 2″wide
  • 10ft carbon tow
  • Seat and backrest
  • Foot braces
  • 6″ Hatch Cover Deck Plate (2x)
  • Nylon webbing, bungee chord and hardware
  • Varnish and/or paint

*You’ll notice that shipping fee is US$40.  This is only an estimate intended to speed up the checkout process and is the amount we’ll hold on your credit card, but we’ll only charge you the actual shipping charge + $5 for S&H, once this is determined, either via final capture or refund.  Prices and kit content can change without notice.  Contact us for a precise shipping quote before ordering. Shipping fees are out of our control, it is therefore understood that shipping price could potentially be higher than the amount held on credit card.   In this case, we will contact you to validate before applying any charge to your CC.

**Once you place your order, please allow us about one week to complete your plan set and prepare the shipment.

Additional information

Weight 7 lbs
Dimensions 24 × 4 × 4 in
Construction method

Stitch & Glue Plywood, Strip Plank

Cut files

No cut files, with DXF cut files

You may also like…

Related products

BEDARD YACHT DESIGN LLC 140 Oscar Hill Rd. #5, Tarpon Springs FL 34689 727-339-8627

© Copyright 2021