F1430 Fishing Kayak Plan Set (Download)

Description

Save on shipping and materials with our downloadable F1430 Sit-on -Top kayak plan set.  With this purchase, you’ll get digitally protected files that you can print yourself.

The 2017 updated F1430 set of plan uses reference points on the hull to speed up the assembly process, and also updated bulkheads that will save some fitting time and save some weight

Included are digital files for:

24″x18″ (Arch C) Lines Drawing

24″x18″ (Arch C) Outboard Profile  & Deck Plan

24″x18″ (Arch C) Construction

24″x18″ (Arch C) Construction Details

24″x18″ (Arch C) Sheathing schedule

24″x18″ (Arch C) Panels Layout

24″x18″ (Arch C) Temp Frames & Reference Points

24″x 15ft Full-size Templates A (print on 24″ roll printer, use mylar or film)

24″x 10ft Full-size Templates B (print on 24″ roll printer, use mylar, film or paper)

8-1/2″x11″ Assembly manual

Check out the complete specs of this boat here

To complete this boat you will need:

• 4 sheets of 4mm marine grade plywood
• 1 sheet of construction plywood, thickness between 1/4″ and 1/2″
• 96″x3/4″x3/4″[2500x18x18mm] (4x) Western red Cedar or similar for sheer clamps
• 12″x3/4″x1/2″[300x18x12mm] (±20x) Western Red Cedar or similar for cleats
• 4″x1-1/2″x1-1/2″[100x38x38mm] (4x) Western Red Cedar or similar for scuppers
• 1 gallon [4l] of epoxy laminating resin
• 1/2 gallon [2l] 2:1 epoxy-activator
• 5Qt [5l] of wood flour
• 10 yards [9m] of 4oz/sq.yd. Fiberglass cloth
• 40yd [36m] 6oz cloth tape x 2″wide
• 10ft [3m]carbon tow
• Seat and backrest
• Foot braces
• 6″ Hatch Cover Deck Plate (2x)
• Nylon webbing, bungee chord and hardware
• Varnish and/or paint

Upon completion of the order, you will receive an email from sales@bedardyachtdesign.com titled Your Bedard Yacht Design order from (date) is complete 

In this email, in addition to your order details, there is a download link (circled in red in the image below).  Clicking on this link will initiate the download of the purchased file.

Additional information